Skip to Content
  1. All products
  2. Helo
  3. Maintenance
  4. Helo Rock-It-Clean Deluxe
  5. Maintenance
Pricelist: B2C (Retail) Pricelist
Pricelist: B2C (Retail) Pricelist
Helo Rock-It-Clean Deluxe

Helo Rock-It-Clean Deluxe

(0 review)

The Helo Rock-It Clean™ Deluxe Cleaning Kit includes the tools needed to clean and rejuvenate your bearings, along with axles, spacers, and other small skate parts.

Made to clean grease, oil, and cream-based bearing lubricants, Rock-It Clean™ is a safe, non-corrosive option for keeping bearings and small parts clean without using water or petroleum-based ingredients.

$ 19.99 $ 19.99
Product Details:
  • Works On Grease, Oil, or Cream-Based Bearings
  • Safe and Non-Corrosive For Bearings and Small Parts
  • 100% Biodegradable
  • Non-Toxic
  • Non-Flammable
  • Contains No Water To Help Prevent Rust
  • Contains No Petroleum-Based 
  • Ingredients
  • Also Cleans Bike Chains and Other Greasy Parts
Kit Includes:
5.1 fl oz / 150ml Rock-It Clean™ Solution
Brush Tool To Remove Contaminants After Cleaning
Bearing Shield Removal Tool
Washable Microfiber Cloth For Drying Parts

Cleaning Instructions:
  1. Use the supplied tool to remove bearing retaining rings, if needed.
  2. Use the supplied tool to remove bearing shields.
  3. Leave the strainer inside the container and place the items to be cleaned inside with the solution. Tighten the lid.
  4. Let parts soak for 30 minutes, shaking or stirring every couple of minutes to help ensure proper cleaning.
  5. Open the lid and lift the strainer out of the container to remove the cleaned parts.
  6. Empty the cleaned parts onto the towel.
  7. If bearings were grease-filled, inspect for any remaining grease and brush off with the supplied brush.
  8. Use the supplied towel to wipe off and dry the parts.
  9. Use compressed air to fully dry and blow out any remaining contaminants. Approved eye protection is recommended.
  10. Once parts are completely dry and clean, they are ready for reassembly.
  11. If cleaning bearings, apply Helo Light Speed Bearing Oil before reassembly for best results.
  12. Once lubricated, reassemble with shields and retaining rings as needed.
Safety Info:

  • Generally, Product Will Not Irritate Skin
  • If Skin Irritation Occurs, Rinse With Water
  • If Irritation Continues, Seek Medical Assistance
  • Avoid Contact With Eyes
  • If Eye Contact Occurs, Remove Contact Lenses If Worn
  • Flush Eyes With Water Or Salt Water Until Irritation Stops
  • Not For Internal Use
  • If Swallowed, Rinse Mouth With Water If The Person Is Conscious
  • Never Give The Person Anything To Drink
  • Do Not Induce Vomiting Unless Recommended By A Doctor
  • If Malaise Occurs, Seek Medical Advice Immediately And Bring The Product Label Or Safety Data Sheet
  • Avoid Inhaling
  • If Breathing Difficulty Or Respiratory Irritation Occurs, Move The Person To Fresh Air And Stay With Them
  • Keep Out Of Reach Of Children